Intersil ISL4485EIB-T

收发器RS422，RS48520Mbps

Overview

The Intersil ISL4485EIB is a high speed, BiCMOS 5V powered, single transceiver that meets both the RS-485 and RS-422 standards for balanced communication. Each driver output/receiver input is protected against ±15kV ESD strikes, without latch-up. Unlike competitive devices, this Intersil device is specified for 10% tolerance supplies (4.5V to 5.5V). The excellent differential output voltage coupled with high drive-current output stages allow 20Mbps operation over twisted pair networks up to 450 feet in length. The 25kΩ receiver input resistance presents a "single unit load" to the RS-485 bus, allowing up to 32 transceivers on the network. Receiver (Rx) inputs feature a "fail-safe if open" design, which ensures a logic high Rx output if Rx inputs are floating. Driver (Tx) outputs are short circuit protected, even for voltages exceeding the power supply voltage. Additionally, on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive. The half duplex configuration multiplexes the Rx inputs and Tx outputs to allow transceivers with Rx and Tx disable functions in 8 lead packages.

Features

Tape & Reel (TR) Package
Tape & Reel (TR) package
8 pin count

70 mV Receiver Hysteresis

Applications

There are a lot of Rochester Electronics, LLC
ISL4485EIB-T Drivers/Receivers/Transceivers applications.

• Remote controls
• Wireless network systems
• Satellite communications networks
• Ethernet circuitry
• Wired telephone
• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC
• Desktop radio