FTDI UMFT230XB-WE

界面USB 2.0 至 UART董事会

Overview

Versions Available () UMFT201XB-01 - FT201XQ Breakout Board() UMFT230XB-01 - FT230XQ Breakout Board This range of FTDI breakout boards are designed to convert USB to serial or parallel interfaces. The UMFT201XB-01 (757-0054) bridges USB to I²C and the UMFT230XB-01 (757-0067) bridges from USB to a UART IC.

The UMFT201XB bridges from USB to I²C two-wire serial bus interfaceThe UMFT220XB bridges from USB to Parallel 4-Bit FT1248 InterfaceThe UMFT230XB bridges from USB to Basic UART (Universal Asynchronous Receiver/Transmitter)The breakout board converts USB 2.0 Full-Speed to a serial interfaceSerial signals on a 2.54mm (0.1”) pitch 10-pin female connectorThe module plug directly into the USB host connector and the pads of the PCB makes electrical contact with the electrical contacts of the USB connectorThe serial interface operate at +3.3VInput/Output pins are 5V tolerant

Features

Box Package
Interface Type
USB 2.0 to UART Function
Yes, ASIC Embedded
FT230X Utilized IC / Part
Flying Leads Primary Attributes
Board(s) Supplied Contents